Why do you need an Evolution HDD pilot bit with pdc cutters?
ROP
If you want higher ROP, the Evolution Drilling Tools HDD pilot bit will give it to you.
The bit’s blade geometry and cutter layout allows the PDC cutters to push further into the formation than a standard PDC bit. Combine that with the Sabertooth™ PDC cutter and you get efficient plowing action and decreased torque.
The large junk slot created by the blade profile gets cuttings away from the face of the bit and out of the hole quicker. You can also fine-tune hydraulics with the bit’s interchangeable nozzles.
Steerability
A short gage profile and decreased blade-to-formation contact decreases torque. And decreased torque improves steerability. Combine these features with the Sabertooth™ PDC cutter and you have improved cutter-to-formation contact.
Evolution Drilling Tools thought through every design element of the HDD Pilot bit to create an ultra-steerable HDD pilot bit.
Durability
The Sabertooth™ PDC cutter has a larger substrate than the competition.
Why?
Durability. The large substrate increases the bonding area between the PDC cutter and the bit which produces a stronger bond between drill bit and pdc cutter.
But Evolution didn’t stop there.
The gage pads are hardfaced with a proprietary tungsten carbide to protect the bit while drilling. Since HDD pilot bits spend their life on the low side of the hole and on their gage pads, Evolution felt this feature was a must have!
If you want faster drill time and lower cost per foot, you need the Evolution HDD pilot bit with PDC cutters.
Get more information by contacting us!
