Our full line of GT Engineering frac plug bits are the best on the market, and manufactured in the USA! The GT Milled Tooth Frac Plug bit is specifically designed and manufactured to perform in soft to medium-hard formations. The GT Frac Plug tricone bit delivers the high penetration rates and reliable durability drilling […]
Oil & Gas
PDC Frac Plug Bit
Our PDC frac plug bit is ideal for drilling out today’s modern frac plugs. PDC is a great option for drilling plugs because they’re extremely durable, which means: Fewer bit trips on today’s longer laterals Less risk of lost pieces in the hole Choose from two different designs – reverse circulation or ported design. Our […]
Atlas Copco Open Bearing Bits
Specifically designed for the water well and work over market, Atlas Copco offers a value product at a competitive price. Tooth bits for well completion and work over: Available in sizes from 2 1/2″ to 6 3/4″ Center circulation IADC for tooth bits – 111, 231, 232, 321, 322, 331, 332 Button bits for water […]
Chomp
The Chomp Mill was specifically designed with domed inserts for maximum durability when milling cast iron and other metals, or a combination of cement and metal. The Chomp Mill not recommended for drilling new formation. Available in sizes 1 3/4″ to 8 3/4″ in 1/8″ increments Bodies are manufactured from 4140 heat treated steel. Carbide […]
Bear Claw
The Bear Claw Mill was specifically designed with large, chisel inserts to give high ROP when milling cement. The chisel shaped inserts are not recommended for drilling new formation or for milling metal. Available in sizes 1 3/4″ to 8 3/4″ in 1/8″ increments Bodies are manufactured from 4140 heat treated steel. Carbide inserts range […]
Aardvark
The Aardvark Tapered Mill is ideal for drilling multiple high pressure plugs and cemented pipe. It can also be used for milling cement and cast iron. The Aardvark Mill is not recommended for drilling new formation. Domed carbide inserts range in size from 5/16″ to 1/2″. Circulation ports from 5/16″ for motor applications to 1 […]
Hurricane
The Hurricane Mill is recommended for milling cement and composite plugs. If milling cast iron, request the Hurricane Mill for metal. The Hurricane Mill is not recommended for drilling new formation. Domed inserts on the OD for increased durability. Chisel inserts in the inner rows for faster penetration. 1/4″ to 1/2″ inch circulation ports for […]
Hurricane for Metal
Hurricane Mill for metal is recommended for use in applications that involve milling composite and cast iron plugs, other metal and cement. The Hurricane Mill for metal is not recommended for drilling new formation. 3/8″ inch domed inserts for increased durability. 1/4″ to 1/2″ inch circulation ports for motor applications or standard circulation. Spiral design […]
PDC Mill
The PDC Mill is used for milling extremely hard and abrasive materials. Uses range from milling hard cement and sand to milling hard scales, such as barium scale. The PDC Mill is not to be used to drill new formation or when any metal will be encountered. Circulation ports from 5/16″ to 1 1/4″ Available […]
Blue Streak Chevron
Available in sizes 1 3/4” to 8” Number of blades: 3 or 4 Standard pin connections: 3 or 4 THD N Rod, A Rod, AW, 2″ IF, 2 3/8″ API, 2 7/8″ API, 3 1/2″ API These premium drag bits are suitable for both water well drilling and oilfield applications. When ordering, please specify the […]
